Five Easy and Affordable DIY Tips You Can Do At Home

Most of the time, homeowners have a lot of problems in their respective properties. From plumbing, landscaping, electrical, or furniture, these problems can be really consuming when it comes to time and money.

At the same time, your living experience at home can be severely compromised if these residential problems aren’t fixed right away. If you are experiencing this kind of predicament, you can take some time off to fix them yourself or hire a plumber in Singapore to take away the hassle.

You get to know more and save important resources in the process. As such, here are a couple of affordable DIY tips to improve the overall value of your home.


Paint your house

Nothing gives your home a new lease on life than having it painted. If you find your current paint color boring or conventional, now would be a good time to think of a new scheme that’s suited to your liking. A good suggestion is to have it painted with a warm tone. Colors like pale yellow, orange, or other earth tones will make your home cozier and more comfortable for its inhabitants. You just need several cans of paint, paint brushes, and a roller brush to do this task.


Place plants inside and outside of your home

Having a lot of plants inside your home will really improve the flow of air and make everything look better. At the same time, planting shrubs and other kinds of plants all around our home exterior can make your residence more inviting. You just need to find the right kind of plants, a shovel, and pots to do this. You’ll also need to find soil that’s conducive for the growth of these plants. Once you have done this, your house will look more remarkable.


Install water-efficient plumbing fixtures

Wasting water can really increase your bills every month. Make sure that doesn’t happen by taking out your old faucets and showerheads right away. Once you have done this, replace them with plumbing fixtures that are water-efficient.

These fixtures provide the experience but with a manageable flow of water. As a matter of fact, you save several gallons of water each month due to these plumbing fixtures. Now multiply those savings each year and you’ll have a lot of money in your hands. Plus, you also get to save water and the planet in the process.


Use energy-saving light bulbs

Along with water, electricity is also an important resource your home uses. If you don’t manage your electrical appliances well, your power bill will really eat up your finances every month. You can easily remedy that by installing power-efficient light bulbs inside your house. These bulbs consume a fraction of the power conventional lighting fixtures use up. As a result, your home will use less power and contribute to the environment.


Improve your home’s air quality

This DIY tip is very easy to do. All you need to do is wash all kinds of fabrics in your home. One good example is your carpet. Carpets contain a lot of allergens, dust, and dirt that will contaminate the air you breathe. Furthermore, you can also clean your air conditioner to maximize its cooling ability and provide you with cleaner air.

Convenient DIY Leak Repair Solutions for 4 Different Types of Roofs

When the rainy season starts, it’s always best to stay indoors whenever you can. Being out in the open when a typhoon hits will be very bad for your health. That’s why your house will always be the best place to stay when a sudden downpour occurs. You’ll always be safe here, not only from the raging rain, but from the heat of the sun as well. But you won’t be able to enjoy that benefit if your house’s roof has leaks in it. Instead, you will find several puddles of water in your home when it starts to rain. If this is the problem you’re currently facing, you should go and repair it right away. As such, here are some DIY solutions to for several kinds of roofs.


Flat Roof

For those of you who have a leaking flat roof on top of your houses, you should get a ladder and some cleaning materials first. Locate the damaged part of the roof and clean it properly. Now, get some primer and apply it on the affected part of the roof. Take some time for it to dry thoroughly. Next, get some patching material. This material should be sturdy and durable enough to withstand the elements. Apply it on the primer and leave it to dry again. Once it has been fully applied, smooth everything out using a flat-roof roller.


Asphalt Shingle Roof

Having a roof made up of asphalt shingles definitely adds a lot of character and several benefits to your house. At the same time, having leaks on this type of roof can really be a big cause of trouble when the rainy season starts. To remedy this kind of problem, you need to lift up the damaged shingle first. This act will expose the nails that are holding them down. Once they are exposed, you can take out the nails and the damaged asphalt shingle with the help of a pry bar. Get a replacement shingle from your handyman supplier and check if it fits perfectly on your roof. While you’re at it, get a few roofing nails too. You’re going to use these nails to hold down the replacement shingle. Afterwards, apply some adhesive on the nails’ heads. Press the shingle hard, let the adhesive dry, and you’re as good as done.


Laminated Roof

Roofs made out laminated material aren’t immune to damage and leaks too. The great thing about it is the DIY repair process is exactly the same of asphalt shingle roofs. Apart from getting a replacement part for your damaged roof, you should also obtain longer roofing nails. That’s because laminated roofs are thicker and they need a specialized kind of nails to hold down their first layer.


Roof Flashing Leak

Roof flashings can also sustain damage and be the cause for leaks when the rains start. If you are in this situation, better clean the damaged part first. At the same time, get rid of any trace of old sealant or mortar that’s holding the flashing together. Next, use a screwdriver to push the flagship clips into their corresponding joints. As a result, the damaged area of the roof flashing will be held in place. Apply a new batch of sealant while the roof flashing is being held back and return it once you’re done with this step. Give it some ample time to dry and you’re finished.

Five Common Wallpaper Problems and Their Corresponding DIY Solutions

Adding a dash of character and style into every home interior is a must these days. Not only are you making your home look better, you are also increasing its overall value. In this case, every bit of interior design improvements you add helps the entire look of your home. One such element that’s easy to add is wallpaper. Unlike paint, wallpapers are easy to apply and it won’t leave you nauseous from its fumes. But in the event something goes wrong with your home’s wallpapers, going DIY is an option you can entertain. Here are some easy repair solutions for common wallpaper problems.

Uneven Corner Edges

Sometimes, the application of wallpaper on the corners of your wall can produce subpar results. Don’t worry because this predicament can be easily fixed. All you need is some caulk or a filler that’s flexible to mold. Apply some caulk along the edges of the wallpaper using a sealant dispenser. Be careful not to overdo it because this might cause more problems. After you have applied caulk, smoothen it first with your fingers dabbed in water. After which, you can smoothen it with a wet sponge to your liking.


Lining Paper Gaps

Like uneven corners, you might find a number of gaps on your wall’s lining paper. This surface imperfection can ruin the overall look of your walls. To remedy this problem, get some decorating filler and apply it to the gaps. Remember to apply the correct amount again because excessive filler can make your wallpaper look ugly. Mold the filler using a filling knife until it suits your preferences. Afterwards, obtain a piece of sandpaper to smoothen the filler that has hardened out. Once you have completed this DIY operation, you won’t have to worry about any gaps ruining your lining paper.


A Torn Wallpaper Section

More often than not, your wallpaper might be torn. This can be caused by hyperactive kids or people who might hang on to your wallpaper when they accidentally fall down. When this happens, you just need to take out the torn section of your wallpaper. Do this carefully so the other parts of the wallpaper won’t be affected. After you have torn out that section, apply some glue or adhesive behind it. Place the torn section back and smoothen it with a damp sponge. Once it dries out, your wallpaper will look like it was new again.


Gluing a Hanging Wallpaper Back

Along with a torn section, the corners or the end part of a wallpaper may hang loose. As a result, you walls will look sloppier than the usual. When this happens, the fix is as easy as a walk in the park. Get a container of adhesive and apply just enough on the back of the hanging wallpaper section. Again, get a damp sponge to smoothen your wallpaper until it looks normal again.


Getting Rid of Air Bubbles Inside the Wallpaper

To get rid of air bubbles, obtain a cutter first. Make a cross cut on the section where there are air bubbles. Peel the four sections of the wallpaper that has been cut. Once again, apply some glue on those sections and put everything back together. To complete this DIY process, smoothen the repaired sections with a damp sponge. For more advice on featuring wallpaper, check out on Hueconcept interior design.